[VOIPSEC] simple point to point voip (ATA) connection?

[satyam]

If you are willing to move up to Grandstream 503 and some asterisk patches
you can do TLS/SRTP as well.

http://www.grandstream.com/ht503.html

Thanks,
Satyam


-----Original Message-----
From: voipsec-bounces at voipsa.org [mailto:voipsec-bounces at voipsa.org] On
Behalf Of Zenaan Harkness
Sent: Friday, November 16, 2007 6:00 PM
To: voipsec at voipsa.org
Subject: Re: [VOIPSEC] simple point to point voip (ATA) connection?

On Nov 17, 2007 7:35 AM, J. Oquendo <sil at infiltrated.net> wrote:
> Yusuf Mayet wrote:
>
> >
> > Yes, you need a SIP server + media Server.  Try Asterisk, OpenPBX,
> > FreePBX, Freeswitch.
>
> Uh no he doesn't need all that garbage. He can do it on one Asterisk
server:
>
> ServerIP        10.20.30.1
> ATA1 IP         22.33.44.1
> ATA2 IP         77.88.99.1
>
> Register both ATA's to 10.20.30.1 why would you even need to do anything
> else.

I want to have the voice streams (RTP I think someone said), go
through a secure link. I was originally thinking ssh tunnel, but it
looks like RTP is UDP and cannot be tunnelled through shh, so I shall
look into OpenVPN instead.

A simple ptp ssh link would have been nice and easy (or more likely
two, each going to the asterisk server), but if a vpn is necessary,
I'll figure that out...

Thanks
Zen

_______________________________________________
Voipsec mailing list
Voipsec at voipsa.org
http://voipsa.org/mailman/listinfo/voipsec_voipsa.org